The One The World Watches

Zero Point Energy Generator for residential Homes Invented by Professor John Roy Robert Searl in 1946

    This Project has been going on for quite some time now. When mass produced it will have a very profound affect on all of humanity. This project goes way beyond zero point energy for residential uses it also has it’s creations in anti gravity devices which will slowly find there way in transportation.
    Speaking of Anti Gravity I will always remember the famous last words in Back To The Future by Christopher Loyd “Roads were we’re going we don’t need roads” I believed they showed a cold fusion energy device which in it’s own right is making progress. Anyway hear is the latest update March 29th 2017 that I could find on the progression of this device shown below

The solution to the world’s energy crisis might be found in a magnetic device that utilizes both ambient temperature and magnets to generate power. In theory, the “Searl Effect Generator” (SEG) has the potential to run completely on its own through a complex interaction between various materials, resulting in an unlimited supply of free and clean energy.

Discovered by John Roy Robert Searl in 1946, the “Searl Effect”, as it is called, effectively captures the kinetic energy generated by natural changes in ambient temperature, and uses it to create electricity. The technology works based on a precise design that utilizes the unique characteristics of various materials to create continual motion. These materials include magnets, neodymium, Teflon and copper.

When joined together in just the right way, these materials are capable of perpetuating a cycle of electron movement that is virtually infinite, which gives the device the potential to create more power than it uses to power itself. In other words, if successful, the SEG could one day replace our dependence on fossil fuels as a primary and superior energy source.

So how does the device work exactly?
The SEG is composed of a series of circular cylinders, all of which have small magnetic rotors spaced evenly around them. The circular pattern allows the rotors to have continuous movement around the cylinders, and their spacing and design prevent any mechanical wear or friction.

One of the neat things about Searl technology is that it is scalable, meaning it can be designed in varying sizes for different applications. According to the company, SEG sizes range from a one meter in diameter machine capable of power an average house, to a 12 meter in diameter machine that could power an entire city. The team says machines even larger than 12 meters are possible as well.…nergy.html

The Searl Effect Generator (SEG) functions along the principles of a linear induction motor (LIM), but designed around a circular track for continuous motion of movable rotors. It is a magnetic prime mover of electromagnetic multi-phased cylindrical rollers over fixed stator rings and free of any mechanical wear or friction.

The SEG’s stators and rollers are magnetic components uniquely magnetized or imprinted with matching magnetic pole patterns.
While the neodymium layer serves as a source or reservoir of electron charges that are drawn out by electromagnetic induction. These redial currents though the rollers makes for mechnical motion at right angles to both the electric and magnetic fields.

The SEG configuration of rollers in motion, cuts through the magnetic flux with a unique cycloid pattern that is superimposed over an orbit around the circumference of the stator. In this manner, each roller can also induce eddy currents of mutual induction between the copper surfaces to form a frictionless ‘magnetic bearing’ as it generates radial electrical potentials. Frictionless operation enables the SEG to operate without physical wear and thus enabling it to operate with a service expectancy of a lifetime.

The generator consists of three stator rings (called Plates) that are composed of four distinctively different materials concentrically layered to each other and fixed to a base. Surrounding each of the Plates is rotors (called rollers) constructed with the same materials but are free to rotate around the Plates. The inner most Plate typically has 12 rollers, 22 on the second stage and 32 on the final Plate. Surrounding the outer most rollers are conventional electromagnets, which by way of magnetic induction taps energy out of the rapid passing of magnetized rollers. These inductive pickup coils are connected in various configurations to supply AC power at a variety of desired voltage and current levels to suit residential or industrial applications.

The SEG is defined as a device constructed of 2,124 component parts that make up 3 plates and 66 roller sets. 12 of the 2,124 components make the 3 plates that act as reaction components. 2,112 components are employed to create 66 roller sets that also act as active components. Each roller set consists of 8 segments constructed from 32 components.

Each segment cannot be less than 34 grams in weight, as the law of the squares defines that value as the lowest value suitable for the reasonable generation of electricity. Therefore the smallest roller set must weigh 272 grams, making a grand total of 2,244 grams per roller set for the smallest surface bound SEG.

The SEG is a step up rotary transformer. In fact it’s a ‘three rotary transformers’ operational system, within the whole unit. The inner transformer output is fed in to the input of the second plate which increases the output of the second unit, which output feeds as an input to the final unit, thereby increasing its final output to a very high voltage. The output windings can be designed to step down the output to a standard 240 volts at the rate of about 15 Kilowatts for a home unit.

Share this post